Custom Made Three Zones High and Low Temperature impact Test
Chamber For GJB Standard
1. Quick Details
|Alternative name||Three Zones Thermal Shock Tester|
|Function||Testing material structure or composite materials in instant and|
continuous temperature changing environment, check the chemical
and physical damage.
Provides basis and reference to improve quality of products
|Corresponding test standard||GJB150, GJB360, GBJ367, GB/T5170, GB10592|
Thermal shock tester also is named rapid temperature changing
tester or thermal cycling chamber.
The tester is used for testing material structure or composite
The specimen will be exposed to continuous and instant changing
circulation of extreme high and low
Then check the chemical change and physical damage of the specimen
caused by instant temperature
The tester is applied to mental, plastics, rubber, electronics. The
test can provides basis and reference
to improve quality of products.
The tester is divided into high temperature zone, low temperature,
and test tank.
The specimen shall be still, while the tester employ special
coldness and heat storage system. The cold
and hot wind will be switched and channeled to the test tank in
moment, and finish the test when get the
a. The tester is used for test chemical change and physical damage
of specimen after suffering
instant extreme high and low temperature change.
b. The tester is divided three zone.
c. Widely usage.
|Temperature range of test tank||－40℃～+150℃|
|Preheating range of high temperature tank||＋60℃～＋150℃ (30min, room temperature ＋|
|Precooling range of low temperature tank||－10℃～－40℃|
|Cooling time for low temperature tank||About 80min from +20℃ to -40℃ (room temperature|
|Temperature shock recovery time|